CentOS7配置nexus开机自启动
1. 新建nexus启动脚本#
# 进入/etc/init.d目录，新建脚本文件nexus cd /etc/init.d/
# 新建脚本文件nexus vim nexus
# 脚本内容
#!/bin/bash
#chkconfig:2345 20 90
#description:nexus
#processname:nexus
export JAVA_HOME=/usr/local/jdk1.8.0_291/
case $1 in
start) su root /usr/local/nexus3/nexus-3.36.0-01/bin/nexus start;;
stop) su root /usr/local/nexus3/nexus-3.36.0-01/bin/nexus stop;;
status) su root /usr/local/nexus3/nexus-3.36.0-01/bin/nexus status;;
restart) su root /usr/local/nexus3/nexus-3.36.0-01/bin/nexus restart;;
dump) su root /usr/local/nexus3/nexus-3.36.0-01/bin/nexus dump;;
console) su root /usr/local/nexus3/nexus-3.36.0-01/bin/nexus console;;
*) echo "Usage: nexus {start|stop|run|run-redirect|status|restart|force-reload}"
esac
2. 设置脚本权限
chmod +x /etc/init.d/nexus
3. 使用service命令使用nexus
service nexus status WARNING: ************************************************************ WARNING: Detected execution as "root" user. This is NOT recommended! WARNING: ************************************************************ nexus is running.
4. 添加到开机启动
chkconfig nexus on
5. 查看nexus开机启动
chkconfig --list nexus Note: This output shows SysV services only and does not include native systemd services. SysV configuration data might be overridden by native systemd configuration. If you want to list systemd services use 'systemctl list-unit-files'. To see services enabled on particular target use 'systemctl list-dependencies [target]'. nexus 0:off 1:off 2:on 3:on 4:on 5:on 6:off
6. 设置防火墙
# 进入防火墙设置文件目录 cd /etc/firewalld/zones/ # 使用vim, 修改防火墙配置文件 vim public.xml
# 添加以下放开端口内容, 其它不变 <rule family="ipv4"> # 开放8081端口给任意ip <port protocol="tcp" port="8081"/> <accept/> </rule>
来源：https://www.cnblogs.com/vitoboy/p/12657581.html
